6% Mo Stainless Steel Bolting

6mo bolting Suppliers in mumbai at low price according to ASTM A193/ ASME SA193 Standard.


smo 254 fasteners manufacturer

What Is 6mo Material?

Though it might be tough to machine SMO 254 Fasteners because of the lack of sulfur content and due to the very high work hardening rate, 254 SMO Bolts are possible to achieve very good machining results with Alloy 254 SMO, by using slow speeds, positive feeds, overpowered machine tools, sharp tools and a decent amount of lubrication. Filler material is required to do 254 SMO Bolt, Without the use of this filler material, it would result in the poor strength of the material. 6% Mo Stainless Steel Bolting has a Density of 0.289 lb/in3 (8 g/cm3). The Thermal Expansion Co-efficient of Alloy 254 SMO (@20-100°C/68-212°F) is 9.17 µin/in °F (16.5 µm/m °C).

6% Mo Stainless Steel Bolting

6% Mo Stainless Steel Bolting

6% Mo Fasteners

6% Mo Fasteners

Inconel 25-6MO Hex Nut

Inconel 25-6MO Hex Nut


6 mo stainless steel bolting supplier


buy directly from manufacturer of Inconel-25-6MO Hex Bolts online and save cost, check 6% Mo Fasteners price in india.


The electrodes that are used in the welding process of Alloy 254 SMO Threaded Rod , have to be a match toAWS A5.11 ENiCrMo-12. Alloy 254 SMO Hex Head Bolt is used by commercial ventures, for their transportation and capacity units. It is also used in many areas such as food processing equipment, desalination, components, petroleum production, heat exchangers, bleaching equipment in the pulp and paper industry, etc.

We manufacture bolts, nuts, anti-theft bolts & nuts, studs, foundation bolts, U-bolts, plain and spring washers in SMO 254 material in India. SMO 254 Socket Head Cap Screws are most popular fastener & can come with large cylindrical heads that have recessed hex-shaped drives. Due to this quality these SMO 254 Screws are mainly in demand by the applications where clearance is limited, and sockets and wrenches can't be used. The size of a SMO 254 metric screws or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated "mm"). The size of SMO 254 nuts, will appear as diameter and pitch.


UNS S31254 6MO Hex Nut Dimensions Chart

UNS S31254 6MO Hex Nut Dimensions Chart

Thread Diameter Of Nominal Size Nut Diameter Of (F) Diameter Of (G) Diameter Of (H)
Hex Nut Width
Across Flats
Hex Nut Width
Across Corners
Wall Thickness
Basic Maximum Minimum Maximum Minimum Basic Maximum Minimum
1/4 .2500 7/16 .438 .428 .505 .488 7/32 .226 .212
5/16 .3125 1/2 .500 .489 .577 .557 17/64 .273 .258
3/8 .3750 9/16 .562 .551 .650 .628 21/64 .337 .479
7/16 .4375 11/16 .688 .675 .794 .768 3/8 .385 .365
1/2 .5000 3/4 .750 .736 .866 .840 7/16 .448 .427
9/16 .5625 7/8 .875 .861 1.010 .982 31/64 .496 .473
5/8 .6250 15/16 .938 .922 1.083 1.051 35/64 .559 .535
3/4 .7500 1-1/8 1.125 1.088 1.299 1.240 41/64 .665 .617
7/8 .8750 1-5/16 1.312 1.269 1.516 1.447 3/4 .776 .724
1 1.0000 1-1/2 1.500 1.450 1.732 1.653 55/64 .887 .831
1-1/8 1.1250 1-11/16 1.688 1.631 1.949 1.859 31/32 .999 .939
1-3/8 1.3750 2-1/16 2.062 1.994 2.382 2.273 1-11/64 1.206 1.138
1-1/2 1.500 2-1/4 2.250 2.175 2.598 2.480 1-9/32 1.ASTM A194 GR. 8 1.245
1-5/8 1.6250 2-7/16 2.438 2.356 2.815 2.686 1-25/64 1.429 1.353
1-3/4 1.7500 2-5/8 2.625 2.538 3.031 2.893 1-1/2 1.540 1.460
2 2.0000 3 3.000 2.900 3.464 3.306 1-23/32 1.763 1.675
2-1/4 2.2500 3-3/8 3.375 3.263 3.897 3.719 1-15/16 1.986 1.890
2-1/2 2.5000 3-3/4 3.750 3.625 4.330 4.133 2-5/32 2.209 2.105
2-3/4 2.7500 4-1/8 4.125 3.988 4.763 4.546 2-3/8 2.431 2.319

6MO Bolts Dimension Table

Alloy S32760 Bolts Dimensions Chart

Nominal Size Of (D) Body Diameter Of 6MO Bolts Thickness Of Head 6MO Bolts Across The Flats 6MO Bolts Across Corners
MAXIMUM (D) MINIMUM (D) MAXIMUM (H) MINIMUM (H) MAXIMUM (F) MINIMUM (F) MAXIMUM (C) MINIMUM (C)
Metric 10 10.00 9.78 6.63 6.17 17.00 15.73 18.48 17.77
Metric 12 12.00 11.73 7.76 4.24 19.00 17.73 20.78 20.03
Metric 14 14.00 13.73 9.09 8.51 22.00 20.67 24.25 23.35
Metric 16 16.00 15.73 10.32 9.68 24.00 23.67 27.71 26.75
Metric 20 20.00 19.67 12.88 12.12 30.00 29.16 34.64 32.95
Metric 24 24.00 23.67 15.44 14.56 36.00 35.00 41.57 39.55
Metric 30 30.00 29.67 19.48 17.92 46.00 45.00 53.12 50.85
Metric 36 36.00 35.61 23.38 21.63 55.00 53.80 63.51 60.79
Metric 42 42.00 41.38 26.97 25.03 65.00 62.90 75.06 71.71
Metric 48 48.00 47.38 31.07 28.93 75.00 72.60 86.60 82.76
Metric 56 56.00 55.26 36.2 33.80 85.00 82.20 98.15 93.71
Metric 64 64.00 63.26 41.32 38.68 95.00 91.80 109.70 104.65
Metric 72 72.00 71.26 46.45 43.55 105.00 101.40 121.24 115.60
Metric 80 80.00 79.26 51.58 48.42 115.00 111.00 132.72 126.54
Metric 90 90.00 89.13 57.74 54.26 130.00 125.50 150.11 143.07
Metric 100 90.00 99.13 63.9 60.10 145.00 140.00 167.43 159.60

Standard Dimensions Of Werkstoff Nr. 1.4547 Flat Washer

zeron 100 flat washer dimensions with tolerances

Size Of 6 Mo Flat Washer
USS
SAE
I.D. (Inside Diameter) Of
(A)
O.D. (Outside Diameter) Of
(B)
Wall Thickness Of
(C)
I.D. Of
(A)
O.D. Of
(B)
Wall Thickness Of
(C)
#2
-
-
-
3/32"
1/4"
0.020"
#4
-
-
-
1/8"
5/16"
0.032"
#6
-
-
-
5/32"
3/8"
0.049"
#8
-
-
-
3/16"
7/16"
0.049"

Stainless Steel 6MO Heavy Hex Bolts Dimensions

Grade B6X Heavy Hex Bolts Dimensions Chart According to ASTM A193
Diameter Of (D)
Body Diameter Of Heavy Hex Bolts (D)
Heavy Hex Bolts Across the Flats (F)
Heavy Hex Bolts Across the Corners ©
Height Of (H) Head
Lengths Of (T) Thread
MAXIMUM
MINIMUM
MAXIMUM
MINIMUM
MAXIMUM
MINIMUM
MAXIMUM
MINIMUM
< 6”
> 6”
1/2
0.515
0.482
0.875
0.85
1.01
0.969
0.364
0.302
1.25
1.5
5/8
0.642
0.605
1.062
1.031
1.227
1.175
0.444
0.378
1.5
1.75
3/4
0.768
0.729
1.25
1.212
1.443
1.383
0.524
0.455
1.75
2
7/8
0.895
0.852
1.438
1.394
1.66
1.589
0.604
0.531
2
2.25
1
1.022
0.976
1.625
1.575
1.876
1.796
0.7
0.591
2.25
2.5
1 1/8
1.149
1.098
1.812
1.756
2.093
2.002
0.78
0.658
2.5
2.75
1 1/4
1.277
1.223
2
1.938
2.309
2.209
0.876
0.749
2.75
3
1 3/8
1.404
1.345
2.188
2.119
2.526
2.416
0.94
0.81
3
3.25
1 1/2
1.531
1.47
2.375
2.3
2.742
2.622
1.036
0.902
3.25
3.5
1 3/4
1.785
1.716
2.75
2.662
3.175
3.035
1.196
1.054
3.75
4
2
2.039
1.964
3.125
3.025
3.608
3.449
1.388
1.175
4.25
4.5
2 1/4
2.305
2.214
3.5
3.388
4.041
3.862
1.548
1.327
4.75
5
2 1/2
2.559
2.461
3.875
3.75
4.474
4.275
1.708
1.479
5.25
5.5
2 3/4
2.827
2.711
4.25
4.112
4.907
4.688
1.869
1.632
5.75
6
3
3.081
2.961
4.625
4.475
5.34
5.102
2.06
1.815
6.25
6.

6MO Hex Bolts Size Chart

Normal Diameter Of 6% Mo Stainless Steel Bolting PITCH In Millimeter Diameter In Millimeter Diameter In Inches Size Of Nuts
Metric 10 1.5 10 0.3937 17
Metric 12 1.75 12 0.4724 19
Metric 14 2 14 0.5512 22
Metric 16 2 16 0.6299 24
Metric 18 2.5 18 0.7087 27
Metric 20 2.5 20 0.7874 30
Metric 22 2.5 22 0.8661 32
Metric 24 3 24 0.9449 36
Metric 27 3 27 1.063 41
Metric 30 3.5 30 1.1811 46
Metric 33 3.5 33 1.2992 50
Metric 36 4 36 1.4173 55
Metric 39 4 39 1.5354 60
Metric 42 4.5 42 1.6535 65
Metric 45 4.5 45 1.7717 70
Metric 48 5 48 1.8898 75
Metric 52 5 52 2.0472 80
Metric 56 5.5 56 2.2047 85
Metric 60 5.5 60 2.3622 90
Metric 64 6 64 2.5197 95
Metric 68 6 68 2.6772 100
Metric 72 6 72 2.8346 105
Metric 76 6 76 2.9921 110
Metric 80 6 80 3.1496 115
Metric 85 6 85 3.3464 120
Metric 90 6 90 3.5433 130
Metric 100 6 100 3.937 145
Metric 110 6 110 4.3307 155
Metric 125 6 125 4.9212 180
Metric 140 6 140 5.5118 200
Metric 160 6 160 6.2992 230

6MO Fasteners Torque Chart

Nominal Diameter Of 6% Mo Stainless Steel Bolting (Inches) Threads (Inches) Torque Foot-LBS (Dry) Torque Foot-LBS (Lubricated)
1/4" 20 7.4 5.5
28 8.4 6.3
5/16" 18 15.1 11.4
24 16.8 12.6
3/8" 16 26.9 20.2
24 30.4 22.8
7/16" 14 43.0 32.3
20 48.0 36.0
1/2" 13 65.6 49.1
20 73.9 55.4
9/16" 12 94.5 71.0
18 105.5 79.1
5/8" 11 130.5 97.9
18 147.8 110.9
3/4" 10 232 174
16 258 194
7/8" 9 373 280
14 412 309
1" 8 560 420
14 628 471
1-1/4" 7 975 730
12 1079 809
1-1/2" 6 1696 1271
12 1908 1430

ASTM A479 UNS S31254 Fasteners Specification Chart

Specification Checklist 6% Mo Stainless Steel Bolting
Different Types Of Head Pan/ Flat/ Oval/ Phillips/ Hex Head
Process Of Making Bolts And Nuts Heat Treatment/ Surface Plating/ Cold Heading/ Insert tapping/ Wire Drawing
Available Types Truss head/ Round/ Oval/ Hex Head/ Pan
Provide Multiple Payment Online Options? Yes
Call, For Free Sample Nuts And Bolts (Some Pieces)
Standard Dimensions Of: ISO 14585C Bolts/ DIN 7973C Bolts/ DIN 7983C Bolts/ ISO 2009 Bolts/ ASME B18.3.1M Bolts/ ASME B18.6.3 Bolts
6MO Bolts ISO And British Standard ISO 10642 Bolts And BS 57 Bolts
Length Of 6MO Bolts 3 millimeter to 200 millimeter
Type Of Threads: BSW And BSF & METRIC And UNC
Get instant delivery Panipat, Jaipur, Kuala-Lumpur, Baku, Pimpri-Chinchwad, Dombivli, Hangzhou, Hazira, New-Delhi, Thane, Dhaka, Melbourne, Dallas, Bhopal, Karachi, Lagos, Batam, Istanbul, Bengaluru, Amsterdam, Shanghai, Kolkata, Quezon-City, Hyderabad, Doha, Secunderabad, Coimbatore, Sharjah, Ajman, Brisbane, Pune, Oyama, Bangkok, Vung-Tau, Singapore, Tiruchirappalli, Sydney, Rajkot, Navi-Mumbai, Patna, Guwahati, Ankleshwar, Paris, Tehran, Raipur, Madrid, Faridabad, Johor-Bahru, Jakarta, Ashburn, Vasai-Virar, Ludhiana, Lucknow, Indore, Surat, Ambernath, Sao-Paulo, Ho-Chi-Minh-City, Al-Jubail, Chicago, Vadodara, Alexandria, Delhi, Bhubaneswar, Visakhapatnam, Perth, Mysuru, Surabaya, Kochi, Jeddah, Chandigarh, Seoul, Abu-Dhabi, Al-Khobar, Ghaziabad, Busan, Cairo, Jamnagar, Agra, Santiago, Hanoi, Gurgaon, Mumbai, Noida, Jamshedpur, Dammam, Dubai, Milan, Houston, Ahmedabad, Kota, Kalyan, Mexico-City, London, Zhengzhou, Beijing, Vapi, Nashik, Puchong, Nagpur, Bogota, Riyadh, Shah-Alam, Manama, Chennai, Calgary,

We can supply ASME SA193 Grade B8MLCUN Heavy Hex Bolts with customized sizes, Check size chart with price list.


254 SMO Bolts Chemical Chart

6% Mo Stainless Steel Bolting Ni C S P Cr Mo Mn Si Fe Cu
17.5 – 18.5
0.02 maximum 6 – 6.5
0.01 maximum 0.03 maximum 19.5 – 20.5 1 maximum 0.8 maximum 0.5 – 1

we can help with all SS 25-6 MO stud bolts and threaded rod supply needs. offer Genuine price, Standard and grades.

ASTM A479 UNS S31254 Nuts Mechanical Properties

Density Tensile Strength Elongation Melting Point Yield Strength (0.2%Offset)
8.0 g/cm3 650 35 % 1320-1390 ℃ 300

Equivalent Chart of 6MO Stainless Steel Fasteners

STANDARD UNS JIS SIS GOST WERKSTOFF NR. AFNOR EN
6% Mo Stainless Steel Bolting S31254 2378 1.4547 Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7

Call Now To Get 6% Mo Stainless Steel Bolting Free Sample

SMO 254 Nuts and Bolts

SMO 254 Nuts and Bolts

UNS S31254 Exhaust Bolts

UNS S31254 Exhaust Bolts

SMO 254 M10 Bolts

SMO 254 M10 Bolts

ASTM A479 254 SMO Carriage Bolts

ASTM A479 254 SMO Carriage Bolts

Alloy 254 Machine Screws

Alloy 254 Machine Screws

WERKSTOFF NR. 1.4547 Washers

WERKSTOFF NR. 1.4547 Washers

254 SMO Threaded Rod

254 SMO Threaded Rod

ASME SA479 SMO 254 Dowel Pins

ASME SA479 SMO 254 Dowel Pins


Our Materials Are Delivered To The Following Countries:

6% Mo Stainless Steel Bolting & Bolts UK, Spain, Mexico, Egypt
6MO Fasteners & Bolts Ellington -United States, Poland, Canada, UK
6mo Bolting & Bolts Malaysia, Singapore, Philippines, Canada
UNS S31254 6MO Hex Nut & Bolts Japan, Malaysia, Romania, Europe
6MO Bolts Sweden, Malaysia, China, Colombia
SMO 254 M10 Bolts United Kingdom -UK, Europe, UAE, Malaysia
UNS S31254 6mo Hex Head Bolts Philippines, Dammam -KSA, Belgium, Indonesia.
SMO 254 Square Bolts Thailand, Europe, France, Qatar
ASTM A479 254 SMO Flange Bolts Malaysia, Thailand, Germany, Czechia
ASTM A479 254 SMO Eye Bolts Oman, UAE, Hong Kong, Malaysia
SMO 254 Lag Bolts Singapore, Italy, Iran, Chile
UNS S31254 6mo Counter sunk Bolts United Arab Emirates (UAE), Norway, Turkey, Malaysia
Alloy 254 Nut Bolts Russia, Malaysia, Dubai, Netherlands
WERKSTOFF NR. 1.4547 Lock Nut & Bolts USA, Malaysia, Bangladesh, Finland
Alloy 254 Eye Nut & Bolts Saudi Arabia (KSA), South Africa, Kuwait, Brazil