SMO is a high alloyed stainless steel developed by Sandvik. It is developed to use in seawater and other chloride-bearing media. It provides good resistance to general corrosion. SMO 254 Round Bar composed of 20 % of chromium and 18 % of Nickel. They are annealed in the temperature ranges of 1150 - 1200 degrees celsius, followed by cooling in water. The 254 SMO Round Bar has a tensile strength in the range of 675 - 850 MPa and yield strength of 310 MPa at room temperature. When hot worked it gives elongation equivalent to 35 %. It has good strength at cryogenic temperatures and does not lose its properties at -196 Fahrenheit. SMO 254 Welding Rod meets the European standards EN 13445-2 as it works in high temperatures between 600 - 1000 Celsius. However, exposing them to these temperatures for a long develop stress as at 400 celsius its yield strength becomes 160 MPa.
A276 6mo UNS S31254 Rod is used in desalination plant equipment and flue gas desulphurization units. UNS S31254 supports cold forming and may be used without re-annealing upto 120 Celsius. It has a modulus elasticity of 196 GPa and minimum tensile strength of 98 Ksi. It is equivalent to DIN 1.4547 Square bar has a moderate density of 8.02 g/cm3 and a specific heat capacity of 464 J/kg - K at room temperature, thus suitable for the paper and pulp industry. It also has a high melting point similar to Alloy 254 flat bar which is equivalent to 1360 to 1405 degrees celsius. Moreover, it has a thermal conductivity of 12.3 W/m - K. This makes it useful in chemical processing industries.
The austenitic stainless steel 6 Moly 254 SMO hex bar has a high level of molybdenum and nitrogen to provide high resistance against crevice corrosion. It is nearly equivalent to Alloy 316L.
Hardened and tempered | H And T |
Annealed | ANN |
Precipitation hardened | PH |
Cold drawn | CD | Polished | P |
Bright drawn | BD | Slit rolled edge | SRE |
Centreless ground | CG | Hot finished | HF |
Cold finished | CF | Hot rolled annealed and pickled | HRAP |
Peeled and turned | P And T | Rough turned/peeled | RT |
Smooth turned | ST | Peeled and reeled | PR |
254 SMO Hex Bar | ||||||||
---|---|---|---|---|---|---|---|---|
Size In Millimeter | Kilogram And Foot | Kilogram And Mtr | Size | Kilogram And Foot | Kilogram And Mtr | Size | Kilogram And Foot | Kilogram And Mtr |
3millimeter | 0.017 | 0.055 | 20millimeter | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
1/8" | 0.019 | 0.062 | 22millimeter | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
4millimeter | 0.030 | 0.098 | 24millimeter | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
3/16" | 0.043 | 0.141 | 25millimeter | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
5millimeter | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
7/32" | 0.058 | 0.190 | 26millimeter | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
6millimeter | 0.068 | 0.223 | 27millimeter | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
7millimeter | 0.091 | 0.298 | 30millimeter | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
8millimeter | 0.120 | 0.398 | 32millimeter | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
9millimeter | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
3/8" | 0.170 | 0.557 | 35millimeter | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
10millimeter | 0.189 | 0.620 | 36millimeter | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
11millimeter | 0.228 | 0.748 | 38millimeter | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
12millimeter | 0.271 | 0.889 | 40millimeter | 3.009 | 9.872 | |||
1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
13millimeter | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
14millimeter | 0.368 | 1.207 | 45millimeter | 3.807 | 12.555 | |||
9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
15millimeter | 0.424 | 1.391 | 48millimeter | 4.330 | 14.205 | |||
5/8" | 0.473 | 1.551 | 50millimeter | 4.698 | 15.414 | |||
16millimeter | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
17millimeter | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
18millimeter | 0.610 | 2.001 | 60millimeter | 6.768 | 22.205 | |||
3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
2-1/2" | 7.576 | 24.856 | ||||||
2-5/8" | 8.354 | 27.409 | ||||||
2-3/4" | 9.169 | 30.083 |
Cold Drawn Tolerances | ||
---|---|---|
Shape And Section | Diameter And Size & width Across Flat | Permitted variation |
millimeter | millimeter | |
Round | ≥6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100 | + 0 to - 0.070, + 0 to - 0.085, + 0 to - 0.100, + 0 to - 0.120, + 0 to - 0.140 |
Flats (thick.) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.250, + 0 to - 0.350 |
Flats Bar (width Of Bar) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100, > 100 ≦ 130, > 130 ≦ 160, > 160 ≦ 320 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.190, + 0 to - 0.220, + 0 to - 0.350, + 0 to - 1.00, + 1.00 to - 1.00 |
Square Bar and, hexagon Bar | ≥ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 105 | + 0 to - 0.090, + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.250 |
Specification Of: | 254 SMO Round Bar |
---|---|
Grade And UNS Number | ASTM A276 UNS S31254 |
Type Of Finish | Smooth Turned/ Cold (bright)/ Drawn Hot Rolled/ Centreless Ground |
Surface Area | Cold Drawn/ Polished And Hairline/ Bright |
Technique Use To Making Bar | Cold Rolled/ Forged Round Bars/ Cold Drawn/ Rod/ Hot Rolled |
Size Chart | Flat Bars (2 -100mm (Millimeter), Square bars (4 to 100 Millimeter), Angle Bars (3*20*20~12*100*100 In MM), Round Bars (Diameter 3-~800 Millimeter), Hex Bars (2-100mm (Millimeter) A/F) |
Type Of UNS S31254 Rod | Round Bars/ Hex Bars/ Flat Bars/ Square bars/ Angle Bars/ Channel Bars |
Outside Diameter Of Hollow Bar | 32 Outside Diameter x 16 Inside Diameter to 250 Outside Diameter x 200 Inside Diameter In MM) |
Cutting Processing | Bars Cutting To 650 millimeter |
Size Of Rectangles | 33 x 30 millimeter to 295 x 1066 millimeter |
Get instant delivery | Dubai, Chennai, Alexandria, Agra, Nashik, Bangkok, Abu-Dhabi, Santiago, Ahmedabad, Singapore, Kuala-Lumpur, Pune, Faridabad, Ghaziabad, Hangzhou, Hyderabad, Nagpur, Indore, Karachi, Ajman, Beijing, Puchong, Tehran, Batam, Riyadh, Lagos, Pimpri-Chinchwad, Kolkata, Rajkot, Kalyan, Sharjah, Busan, Hazira, Brisbane, Thane, Baku, Mysuru, Dombivli, Al-Khobar, Bengaluru, Dallas, Patna, Al-Jubail, Hanoi, Mumbai, Ankleshwar, Vapi, Amsterdam, New-Delhi, Jamnagar, Secunderabad, Mexico-City, Sao-Paulo, Vadodara, Raipur, Guwahati, Cairo, Dhaka, Ludhiana, Navi-Mumbai, Tiruchirappalli, Ambernath, Kota, Coimbatore, Shanghai, Melbourne, Jeddah, Zhengzhou, Shah-Alam, Milan, Johor-Bahru, Bhopal, Perth, London, Ho-Chi-Minh-City, Calgary, Chandigarh, Lucknow, Dammam, Bhubaneswar, Houston, Quezon-City, Chicago, Delhi, Sydney, Seoul, Surat, Madrid, Bogota, Jaipur, Kochi, Panipat, Gurgaon, Ashburn, Noida, Vung-Tau, Oyama, Surabaya, Istanbul, Manama, Jamshedpur, Paris, Doha, Visakhapatnam, Vasai-Virar, Jakarta, |
Bar Standard | ASTM/ASME B166 And AMS 5513, AMS 5647 Or AMS 5511 |
Standard Dimensions Of | BS/ ASME/ AISI/ EN/ DIN/ JIS/ ASTM |
Standard Dimensions Of | BS/ ASME/ AISI/ EN/ DIN/ JIS/ ASTM |
Size | Grade | Price In INR Per Unit |
---|---|---|
Size :50mm Diameter X 500 Mm | 254 SMO | 764.00 |
Size :60mm Diameter X 400 Mm | 254 SMO | 985.00 |
Size :80mm Diameter X 600 Mm | 254 SMO | 1370.00 |
Size :100mm Diameter X 800 Mm | 254 SMO | 1827.00 |
We Will Better Any Competitor's Price On Our Stocked Items Of 254 SMO Round Bar in India. For final Alloy 254 Rod Price List Please Call on +91(22) – 6743 8321 or drop an E-Mail : enquiry@siddhagirimetals.com.
Grade | Mo | Ni | Cr | C | Mn | Si | Cu | S | P |
254 SMO Round Bar | 6.0-6.5 | 17.5-18.5 | 19.5-20.5 | 0.02 | 1 | 0.08 | 0.5-1.0 | 0.01 | 0.03 |
Density | Yield Strength (0.2%Offset) | Elongation | Melting Point | Tensile Strength |
8 g/cm3 | 300 | 35 % | 1320-1390 ℃ | 650 |
STANDARD | GOST | AFNOR | EN | WERKSTOFF NR. | UNS | SIS | BS |
254 SMO Round Bar | – | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 | 1.4547 | S31254 | 2378 | – |
Type Of Bar | Size In Millimeter | Size In Inches | Tolerance In ISO |
---|---|---|---|
Cold Drawn ; Polish Round Bars | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
Cold Drawn ; Ground Bars | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
Peeled ; Polished Round Bars | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
Peeled ; Ground Bars | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
254 SMO Round Bar Dimensions | |||||||
---|---|---|---|---|---|---|---|
Size Of Metric | US Bar Standard | Canadian Standard | Japanese Standard | ||||
Size Of Bar | Diameter In (millimeter) | Bars Size | Diameter In (Inches) | Bars Size | Diameter In (millimeter2) | Bars Size | Diameter In (millimeter) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.600 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.600 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
SMO 254 Round Bars | United Kingdom -UK, Europe, UAE, Malaysia |
6mo UNS S31254 Rod | France, Thailand, Europe, Qatar |
Alloy 254 Bars | South Africa, Bahrain, Singapore |
Inox 254 SMO Bright Bars | Europe, Malaysia, Romania, Japan |
254 SMO DIN 1.4547 Black Bars | Germany, Czechia, Malaysia, Thailand |
Moly 254 SMO Hot / Cold Drawn Bars | Bangladesh, Finland, USA, Malaysia |
SMO 254 Welding Rod | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |
Alloy 254 Forged Bars | Philippines, Nigeria, Australia, UK |
254 SMO® Super Austenitic Stainless Steel Bars | Italy, Iran, Chile, Singapore |
A479 SMO 254 Round Bars | Turkey, United Arab Emirates (UAE), Norway, Malaysia |
UNS S31254 Flat Bars | Dammam -KSA, Indonesia, Belgium, Philippines |
ASTM A479 UNS S31254 Hex Bars | Colombia, Malaysia, Sweden, China |
Alloy 254 Bars | Netherlands, Malaysia, Russia, Dubai |
DIN 1.4547 Square Bars | Egypt, Spain, UK, Mexico |
ASTM A479 UNS S31254 Angle Bar | Ellington -United States, Poland, Canada, UK |
254 SMO Alloy Rod | Canada, Singapore, Malaysia, Philippines |