254 SMO Plate

ASTM A240 UNS S31254 Sheet and Strip manufacturer and Suppliers in India, view 254 SMO plate price.


6mo 254 smo foil

A lot of austenitic stainless steel alloy sheets are available in the market. 254 SMO Plateis a high end is a low carbon content austenitic steel made up of molybdenum and nitrogen alloy. 254 smo steel plate showcases excellent resistance to crevice corrosion, pitting, and fatigue corrosion. 254 smo plate is 2 times stronger than the 300 series of stainless steel. Hence it is considered to be stronger than any other austenitic grade. The ductility and impact strength of the DIN 1.4547 strip is also said to be high. 

6mo 254 SMO foil has a high level of chromium, molybdenum, and nitrogen. This is the reason ASME SA 240 UNS S31254 Sheets are widely used in high chloride environments such as pulp mill bleach, brackish water, and seawater. ASTM A240 254 SMO Stainless Steel Coil is easy to maintain and install and also has a long working life. Alloy 254 SMO Perforated Sheet are hence used in condensers and pollution control. 

254 SMO 6 Moly Chequered Plate also have good weldability due to which they are preferred in various industries. 2B Finish ASTM A240 UNS S31254 Cold Rolled Sheet can withstand high pressure as well and have low thermal conductivity and high thermal expansion. Aisi 254 SMO Hot Rolled Plate has an increased surface area which helps in increasing the pitting life, reduces the leaks, and results in a better heat transfer. SMO 254 plate heat exchangers are used in industries such as the pharmaceutical, hydraulic, and food industries.


254 SMO Stainless Steel Plate

ASTM A240 UNS S31254 Strip

DIN 1.4547 Coil And Foil

254 SMO Plate
254 SMO Plate
254 SMO Sheet
254 SMO Sheet

254 smo plate prices are the cheapest in India as compared to other countries manufacturing it. On average these sheets are available at Rs. 1200 per Kg in India whereas in other countries like the USA and Japan it ranges from Rs.1400 to Rs.1600. We at Siddhagiri Metal provide these sheets at a competent price and assure you of their quality.


254 smo plate supplier


We help you to save your cost by providing exact size of ASME SA 240 DIN 1.4547 Coil and Foil, check Price list.


254 SMO Stainless Steel Plate Manufacturer Specifications

Specification 254 SMO Plate And Sheet
Thickness 0.063 to 0.375 Inches
Plate Length Up to 240 Inches
Form Blank (Circle)/ Ring (Flange)/ Plain Sheet/ Strip/ Flats/ Coils/ Foils/ Rolls
Most Selling Type Of Rolling Sheet/ Rolling Plate/ Flat Shim/ Flat Sheet/ Shim Sheet/ descaled/ tread plate/ Checker Plate, Plate/ Sheet/ Coils/ Foils/ Strip/ Flats/ Clad Plate/ Plain Sheet/ Rolls/ Blank (Circle)/ sheared/ annealed/ soft annealed
Standard Dimensions Of EN ISO 18286/ ASME IID/ ASTM A 959/ ASTM A 480
UNS Number Of Copper Nickel 70/30 Plate UNS S31254
Chemical Composition UNS S31254 Sheet : Copper (69.5%)/ Nickel (30.0%)/ Iron (0.5%)
Get instant delivery of 254 SMO Sheet Karachi, Houston, Santiago, Kota, Alexandria, Milan, Lucknow, Bhubaneswar, Bogota, Perth, Ajman, Coimbatore, Faridabad, Patna, Chicago, Kuala-Lumpur, Al-Khobar, Kalyan, Panipat, Vadodara, Lagos, Manama, Melbourne, Ambernath, Singapore, Calgary, Shah-Alam, Delhi, Rajkot, Jamnagar, Dhaka, London, Jeddah, Secunderabad, Nashik, Chennai, Bhopal, Hazira, Ghaziabad, Bengaluru, Chandigarh, Agra, Kolkata, Sydney, Hangzhou, Vasai-Virar, Dammam, Ludhiana, Noida, Tiruchirappalli, Busan, Hyderabad, Pune, Ahmedabad, Hanoi, Surabaya, Seoul, Puchong, Zhengzhou, Baku, Mexico-City, Doha, Ho-Chi-Minh-City, Dombivli, Nagpur, Mysuru, Navi-Mumbai, Istanbul, Madrid, Surat, Paris, Tehran, Vung-Tau, Batam, New-Delhi, Gurgaon, Johor-Bahru, Sharjah, Sao-Paulo, Al-Jubail, Dallas, Kochi, Abu-Dhabi, Brisbane, Indore, Jamshedpur, Ankleshwar, Oyama, Jaipur, Pimpri-Chinchwad, Jakarta, Mumbai, Ashburn, Cairo, Beijing, Quezon-City, Thane, Vapi, Visakhapatnam, Dubai, Shanghai, Raipur, Bangkok, Amsterdam, Guwahati, Riyadh,
Mechanical Properties Of Tensile 40000 psi
Plate Width 36 to 60 Inches

Check spec sheet, composition, density and thickness of Alloy 254 SMO Perforated Sheet Ex Mumbai.


Alloy 254 Foil Grades Equivalent

STANDARD WERKSTOFF NR. AFNOR EN UNS SIS
254 SMO Plate And Sheet 1.4547 Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7 S31254 2378

SA 240 UNS S31254 Foils Chemical Structure

Grade Mn Si P S Ni Cr Mo Cu N C
254 SMO Plate And Sheet 1.0 0.08 0.03 0.01 17.5-18.5 19.5-20.5 6-6.5 0.5-1.0 0.18-0.22 0.02

Buy your sizes from our 6mo 254 SMO Hot Rolled and Cold Rolled Plate and Shim Sheet Ready Stock.

SMO 254 Rolling Sheet Mechanical Characteristics

8.0 g/cm3 1320-1390 ℃ 650 300 35 %
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation

Werkstoff Nr. 1.4547 Plate Size List

STOCKED SIZES
Size Range 254 SMO Plate And Sheet Size Of Plate & Sheet
.125" Perforated Plate And Sheet 3.18mm
.134" Coil And Strips 3.40mm
156" Perforated Plate And Sheet 3.96mm
187" Sheet & Rolling Plate 4.75mm
250" Rolling Sheets 6.35mm
312" Perforated Plate And Sheet 7.92mm
375" Rolling Plate And Sheet 9.53mm
.500" Sheet And Clad Plate 12.7mm
.625" Flat Shim And Sheet 15.9mm
.750" Sheet And Strips 19.1mm
.875" Rolling Sheets 22.2mm
1" Plate/ Flat Shim/ Sheet 25.4mm
2" Plate And Clad Plate & Sheet 50.8mm
3" Plate And Rolling Sheets 76.2mm

Dimension Table Of ASTM A240 254 SMO Stainless Steel Plate

Dimensions Of Metric

finish Surface

Thickness (millimeter)

Width (millimeter)

2B – Cold rolled, heat treated, pickled, skin passed

0.25–8.0

maximum 2032

2D – Cold rolled, heat treated, pickled

0.4–6.35

maximum 1524

2E – Cold rolled, heat treated, mechanically descaled

0.4–8.0

maximum 2032

2R – Cold rolled, bright annealed

0.25–3.5

maximum 1524

2H – Work hardened

0.4–6.35

maximum 1524

Polished, brushed

0.5–4.0

maximum 1524


Weight Formula Of ASME SA 240 UNS S31254 Plate

Thickness In Inches Plate Weight (Unit Area) Density
3/16" 0.06000 lbs/in²42.184176 kilogram/m² 0.315 lbs/in³8.72 g/cm³
1/4" 0.08 lbs/in²56.245568 kilogram/m² 0.315 lbs/in³8.72 g/cm³
3/8" 0.121 lbs/in²85.0714216 kilogram/m² 0.315 lbs/in³8.72 g/cm³
1/2" 0.161 lbs/in²113.1942056 kilogram/m² 0.315 lbs/in³8.72 g/cm³
5/8" 0.196 lbs/in²137.8016416 kilogram/m² 0.315 lbs/in³8.72 g/cm³
3/4" 0.235 lbs/in²165.221356 kilogram/m² 0.315 lbs/in³8.72 g/cm³
7/8" 0.274 lbs/in²192.6410704 kilogram/m² 0.315 lbs/in³8.72 g/cm³
1" 0.313 lbs/in²220.0607848 kilogram/m² 0.315 lbs/in³8.72 g/cm³

One Of The Most Trusted And Reliable Supplier Of 254 SMO Plate And Sheet In India

SMO 254 Foils

SMO 254 Foils

254 SMO Rolling Sheet

254 SMO Rolling Sheet

ASTM A240 254 SMO Perforated Plate

ASTM A240 254 SMO Perforated Plate

Alloy UNS S31254 Polished Plate

Alloy UNS S31254 Polished Plate

WERKSTOFF NR. 1.4547 Hot Rolled Sheets

WERKSTOFF NR. 1.4547 Hot Rolled Sheets

1.4547 Stainless Steel Cold Rolled Plate

1.4547 Stainless Steel Cold Rolled Plate

Alloy 254 SMO Foil Sheet

Alloy 254 SMO Foil Sheet

SMO 254 Flat Sheet

SMO 254 Flat Sheet


No Matter Where The Location, Recently We Have Successfully Supplied 254 SMO Plate And Sheet To The Following Countires

254 SMO Stainless Steel Plate Norway, Malaysia, United Arab Emirates (UAE), Turkey
254 SMO Stainless Steel Sheet Indonesia, Belgium, Dammam -KSA, Philippines.
ASTM A240 UNS S31254 Sheet Singapore, Malaysia, Canada, Philippines
nox 254 SMO Shim Sheet Europe, Romania, Japan, Malaysia
254 smo steel plate Malaysia, Sweden, Colombia, China
DIN 1.4547 strip Netherlands, Russia, Dubai, Malaysia
6mo 254 SMO foil Saudi Arabia (KSA), Kuwait, South Africa, Brazil
ASME SA 240 UNS S31254 Sheet Nigeria, Australia, Philippines, UK
ASTM A240 254 SMO Stainless Steel Coil Czechia, Malaysia, Germany, Thailand
Alloy 254 SMO Perforated Sheet Malaysia, USA, Finland, Bangladesh
254 SMO 6 Moly Chequered Plate Iran, Chile, Italy, Singapore
Aisi 254 SMO Hot Rolled Plate Spain, UK, Egypt, Mexico
SMO 254 plate heat exchangers Poland, Canada, Ellington -United States, UK
254 SMO Sheet Europe, UAE, United Kingdom -UK, Malaysia
SMO 254 Foils Malaysia, Hong Kong, Oman, UAE
SA 240 UNS S31254 Sheet Bahrain, South Africa, Singapore
Alloy 254 Stainless Steel Sheet Thailand, Europe, France, Qatar