17-4 Ph Round Bar is a grade of martensitic, precipitation-hardening stainless steel with the additions of chromium, nickel, and copper. It is the widely used amongst all the precipitation hardening stainless steel. 17-4 Ph Stainless Steel Round Bar has a valuable combination of high strength, good corrosion resistance, and toughness in both base metals and welds. It can be welded using common fusion and resistance welding methods. For welding this alloy oxyacetylene welding method is not preferred.
17-4 Ph H900 Round Bar properties give manufacturers a chance to add reliability to their products while clarifying fabrication and frequently reducing costs. ASTM A564 grade 630 offers excellent resistance to corrosion for paper, chemical, and food processing industries, and it resists corrosive attacks better than most hardenable stainless steels. It can be forged at 1010°C and before forging it has to be soaked at 1177°C. Post-work solution treatment should be done before final hardening.
astm a705 type 630 high strength is maintained to approximately 600°F. It has good resistance to stress corrosion cracking at higher aging temperatures. astm a705 gr 630 requires a simple heat treatment to produce a wide range of properties, including its high strength. It has a slightly higher ferrite content than other PH grades which makes it a bit more magnetic. To improve its formability, heat treatments can be used before cold working, 17-4 Ph flat bar is an outstanding choice for the product which needs excellent mechanical properties. It is useful for an application which needs high strength and hardness and corrosion resistance together.
Table of Content
Round bar size | Diameter: 3-~800mm |
---|---|
Hex Bar size | 2-100mm A/F |
Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Square bar size | 4 to 100mm |
Angle bar size (in mm) | 3*20*20~12*100*100 |
Section | 3.0 to 12.0mm thickness |
Channel Bar (in mm) | 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness |
Hollow Bar (in mm) | 32 OD x 16 ID to 250 OD x 200 ID) |
Billet Size | 1/2" to 495mm Diameter |
Rectangles Size | 33 x 30mm to 295 x 1066mm |
Manufacturing Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Processing | Bar cutting to 650mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
COND A
|
STOCKING DIAMETERS
|
1/2” TO 20”
|
---|---|---|
MATERIAL LENGTHS
|
UP TO 24’
|
|
COND HH1150, (H1150D)
|
STOCKING DIAMETERS
|
1/2” TO 15”
|
MATERIAL LENGTHS
|
UP TO 24’
|
|
COND H1150
|
STOCKING DIAMETERS
|
1/2” TO 9”
|
MATERIAL LENGTHS
|
UP TO 24’
|
|
COND H1075
|
STOCKING DIAMETERS
|
1/2” TO 5-1/2”
|
MATERIAL LENGTHS
|
UP TO 24’
|
|
COND H1025
|
STOCKING DIAMETERS
|
1/2” TO 5-1/2”
|
MATERIAL LENGTHS
|
UP TO 24’
|
Metric | US Bar | ASTM/ Canadian | Japanese | ||||
---|---|---|---|---|---|---|---|
Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.625 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
UNS S17400 Round Bar
17-4ph H1025 Bar
AMS 5643 Steel 17-4 PH Bright Bar
DIN 1.4542 Hex Bars
SS 17-4 PH Cold Finished Bars
17-4 PH Stainless Steel Rods
AISI 17-4 PH Square Bars
17-4ph H1150 Round Bar
Condition
|
Ultimate Tensile, Strength (PSI)
|
0.2% Yield, Strength (PSI)
|
Elongation, (% in 2in.)
|
Reduction Of , Area (%)
|
Hardness , Brinell
|
Hardness, Rockwell
|
---|---|---|---|---|---|---|
H900
|
190,000
|
170,000
|
10
|
40
|
388
|
C40
|
H1025
|
155,000
|
145,000
|
12
|
45
|
331
|
C35
|
H1075
|
145,000
|
125,000
|
13
|
45
|
311
|
C32
|
H1150
|
135,000
|
105,000
|
16
|
50
|
277
|
C28
|
H1150-M
|
115,000
|
75,000
|
18
|
55
|
255
|
C24
|
H1150-D
|
125,000
|
105,000
|
16
|
50
|
255 min-, 311 max
|
C24-33
|
STANDARD | WERKSTOFF NR. | UNS |
SS 17-4 PH | 1.4542 | S17400 |
Grade | C | P | Si | Ni | Cu | Fe | Mn | S | Cr | Cb+Ta |
SS 17-4 PH | 0.07 | 0.04 | 1.0 max | 3.0 – 5.0 | 3.0 – 5.0 | Bal | 1.0 max | 0.03 | 15.0 – 17.5 | 5 X C / 0.45 |
Philippines, Dammam -KSA, Belgium, Indonesia | 17-4 pH 630 Hot Rolled Stainless Steel Round Bar |
Thailand, Czechia, Malaysia, Germany | SS Stainless Steel Round Bar 630 17-4pH |
Europe, Qatar, Thailand, France | 17-4pH SUS630 Stainless Steel Forging Round Bar |
Bangladesh, Malaysia, Finland, USA | 1.4542 AISI 17-4pH S17400 Stainless Steel Round Bar |
Singapore, Bahrain, Singapore, South Africa | H6 H7 H8 H9 H10 H11 H12 H13 Hot Rolled 17-4pH Stainless Steel Round Bar |
AMS 5643 17-4 PH Forged Round Bars | 17-4 PH Stainless Steel DIN 1.4542 Round Bars |
AMS 5643 SS 17-4 PH Rods | 17-4 PH Round Bar |
17-4 PH Stainless Steel Rods | AISI 17-4 PH Hexagon Bars Dealers |
Top Quality High 17-4 PH Spring Steel Bars | 17-4 PH SS Cold Drawn & Polished Square Bars |
AISI Stainless Steel 17-4 PH Black Bars | 17-4 PH Steel Threaded Bars |
13-8 PH Bright Bar | Austenitic ASTM Bright 17-4 PH Bar |