Table of Content
Round bar size | Diameter: 3-~800mm |
---|---|
Hex Bar size | 2-100mm A/F |
Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Square bar size | 4 to 100mm |
Angle bar size (in mm) | 3*20*20~12*100*100 |
Section | 3.0 to 12.0mm thickness |
Channel Bar (in mm) | 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness |
Hollow Bar (in mm) | 32 OD x 16 ID to 250 OD x 200 ID) |
Billet Size | 1/2" to 495mm Diameter |
Rectangles Size | 33 x 30mm to 295 x 1066mm |
Manufacturing Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Processing | Bar cutting to 650mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
AMS 5659 15-5PH Flat Bar
15-5 Ph Rod
DIN 1.4545 Hex Bars
UNS S15500 Square Bar
15-5 ph stainless steel Hot Rolled Bar
15-5 ph stainless steel h1025 Bar
alloy 15-5 ph bar ams 5659
15-5 ph flat bar
Grade | C | P | Si | Ni | Al | Fe | Mn | S | Cr | Cb+Ta |
SS 15-5PH | 0.07 | 0.04 | 1.0 | 3.5 – 5.5 | – | Bal | 1.0 | 0.03 | 14.0 – 15.5 | 0.15 – 0.45 |
Material | Condition, | Ultimate Tensile Strength (ksi) | 0.2 % Yield Strength (ksi) | Elongation % in 2D | % Reduction of Area | Rockwell C Hardness |
Alloy 15-5 PH, Bar AMS 5659 | Cond A | – | – | – | – | 363 HB max |
Alloy 15-5 PH, Bar AMS 5659 | H900 | 190 | 170 | 10 | 35 | 388-444 |
Alloy 15-5 PH, Bar AMS 5659 | H925 | 170 | 155 | 10 | 38 | 375-429 |
Alloy 15-5 PH, Bar AMS 5659 | H1025 | 155 | 145 | 12 | 45 | 331-401 |
Alloy 15-5 PH, Bar AMS 5659 | H1075 | 145 | 125 | 13 | 45 | 311-375 |
Alloy 15-5 PH, Bar AMS 5659 | H1100 | 140 | 115 | 14 | 45 | 302-363 |
Alloy 15-5 PH, Bar AMS 5659 | H1150 | 135 | 105 | 16 | 50 | 277-352 |
STANDARD | WERKSTOFF NR. | UNS |
SS 15-5PH | 1.4545 | S15500 |