Monel K500 Supplier | Alloy K500 | UNS N05500 | NA18 |En 2.4375

Monel K500 supplier

Monel K500 Supplier | Monel Alloy K500 | UNS N05500 | En 2.4375 | NiCu30Al | NA18

Monel K500 Supplier, Siddhagiri Metals and Tubes keeps a huge stock of all forms of Monel K500. Exporting monel supplies to more than 70 countries from the last 10 years.

Monel K500 is also known as Monel Alloy K500 or Nickel K500 , it’s Standards are UNS N05500, En 2.4375, W.Nr. 2.4375, NA18 and chemical designation as NiCu30Al. We keep Ready Stock of Monel K-500 Round Bar ASTM B865.

Monel K500 is widely used as Pump Shafts, Propellor Shafts, Scrapers and doctor blades, Springs and as Tools in oil-wells. Monel K500 is a nickel-copper composite which joins the great consumption resistance of Monel combination 400 with the included points of interest of more noteworthy quality and hardness. The expanded properties are acquired by including aluminum.What’s more, titanium to the nickel-copper base, and by warming under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are accelerated all through the framework The warm preparing used to impact precipitation is normally called age solidifying or maturing This nickel combination is flash safe and non-attractive to – 200° F. In any case, it is conceivable to add to an attractive layer on the surface of the material amid preparing. Aluminum and copper may be specifically oxidized amid warming, leaving an attractive nickel-rich film all things considered. Pickling or Monel K-500 Bars splendid plunging in corrosive can evacuate this attractive film and restore the non-attractive properties

MONEL® is a registered Trademark of Special Metals.

Monel K500 Forms

Fabrication with Monel K500 :

Alloy K500 is promptly created by standard business methodology. Welding amalgam K500 is done by the gas-tungsten-circular segment welding procedure. It is suggested that Monel K500 be strengthened when it is welded and that any weldments be stretch diminished preceding maturing. Substantial machining of this combination is best proficient when the material is in the tempered condition or hot-worked and extinguished condition.This Age-solidified material can be complete machined to close resistances and fine wraps up. Along these lines, the prescribed practice is to machine somewhat oversize, age-solidify, then complete to measure. Amid maturing, a slight changeless withdrawal happens, yet little warpage happens as a result of the low temperatures and moderate cooling rates included.

Monel K500 Chemical Composition :

ElementContent (in Percentage)
Cu27.0 - 33.0
Ni63.0 min.
Fe2.0 max
Al2.30 - 3.15
Ti0.35 - 0.85
C0.25 max.
Mg1.5 max.
S0.01 max.
Si0.5 max.

Monel K500 Mechanical Properties :

Product FormConditionTensile (ksi).2% Yield (ksi)Elongation %Hardness
Rod & BarHot-Finished/Aged140-190100-15030-2027-38 HRC
Rod & BarHot Finished/Annealed90-11040-6045-2575-90 HRB
Rod & BarHot Finished/Annealed/Aged130-16585-12035-2024-35 HRC
Rod & BarCold-Drawn/Aged135-18595-16030-1525-41 HRC
Rod & BarCold-Drawn/Annealed/Aged130-19085-120
30-20
24-35 HRC
PlateHot-Finished/Aged140-180100-13530-2027-37 HRC
SheetCold-Rolled/Annealed90-10540-6545-2585 HRB Max

Monel K500 Physical Properties :

Property
Melting Range2400-2460°F
Density8.44 g/cm3
Modulus of elasticityTension26.0
Torsion9.5
Poisson’s Ratio0.32

Monel K500 Properties :

  • Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
  • Excellent resistance to high velocity sea water
  • Resistant to a sour-gas environment
  • Excellent mechanical properties from sub-zero temperatures up to about 480C
  • Non-magnetic alloy

 

Monel K500 Applications :

  • Electronic equipmets and soil-well surveying equipment
  • Monel alloy k500 is suitable for many cryogenic applications
  • Approved by the ASME Boiler and Pressure Vessel Code as an acceptable material for use as bolting

Monel K500 Equivalent Grades and Other Names :

  • Monel Alloy K500
  • UNS N05500
  • Nickel Alloy K500
  • Werkst. Nr. 2.4375
  • NiCu30Al
  • En 2.4375

Siddhagiri Metals and Tubes, Monel K500 Supplier Manufacturer :

Siddhagiri Metals and Tubes is Supplier of Monel K500 grade at modest prices. We stock an extensive line of Monel Alloy K-500 products for specific needs.They are :-

  • Monel K500 Round Bar

Siddhagiri Metals and Tubes provides sophisticated machines to provide high-quality products with zero defects and superior performance. Siddhagiri provides various Nickel based grade such as Inconel, Monel, Hastelloy, Alloy 20, SMO254, Duplex and Super duplex steel etc.

Summary
product image
Author Rating
1star1star1star1star1star
Aggregate Rating
5 based on 4 votes
Brand Name
Siddhagiri Metals and Tubes
Product Name
Monel K500 - UNS N05500
error: Content is protected !!