Inconel 600 Supplier Exporter | En 2.4816 |UNS N06600 | Incoloy 600 | Alloy 600 | WNR 2.4816

Inconel 600 supplier,   En 2.4816

Inconel 600 Supplier | En 2.4816 | Inconel 600 Grade Manufacturer and Exporter | UNS N06600 | Inconel 600 at Best Price | Incoloy Alloy | WNR 2.4816

Inconel 600 (UNS N06600) is an alloy with a combination of Nickel and Chromium. It is used for a wide spectrum of applications that requires high-temperature strength and corrosion resistance. This alloy was mainly designed for service temperatures from cryogenic to raised temperatures up to 2000° F. This alloy is  a non-magnetic, high-temperature alloy that has excellent mechanical properties and offers the desirable combination of high strength, hot and cold workability and exceptional resistance to an ordinary form of corrosion. It also presents good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked machining conditions. Its ability to withstand corrosion in a number of forms has made this alloy the perfect for use in furnace components and chemical processing equipment. It is also used effectively in the food industry and in nuclear engineering because Inconel 600 alloy will maintain its structure in applications that would otherwise cause permanent distortion to other alloys. We are one of the best Inconel 600 (En 2.4816) Manufactures, Stockist, Exporters and Suppliers from India.

Inconel 600 Standards and Specifications  of Inconel alloy 600 include UNS N06600, En 2.4816, Werkstoff number 2.4816, NA 14 NC15FE11M, NCF 600, XH60BT, NiCr15Fe, ЭИ868, etc.

Inconel 600 Corrosion Resistance
Inconel Alloy 600 has high chromium content which raises its oxidation resistance considerably above that of pure nickel, while its high nickel content enables it to retain significant resistance under reducing conditions. This alloy exhibits an exceptional amount of resistance to stress and salt water, exhaust gasses and a number of organic acids and compounds. Controlled chemical composition limits make it immune to chloride-ion stress-corrosion cracking and also provides the high value of resistance to alkaline solutions.

Heat Treatment of Inconel alloy 600
Inconel alloy 600 hardens by heat treatment.
The following heat treatment can be used for this alloy:

  • Annealing: 800~1150℃; Air or water cooling

** Note: There is a strong tendency for the crystal grains to become coarse after the temperature rises above 1050℃

Welding Inconel 600
This Alloy 600 can be welded by standard welding processes as used for stainless steels. Although, welding rods are available specially for welding Inconel 600. On welding, Inconel alloy 600 forms an oxide layer which can be removed by grinding

Machining Inconel 600
Nickel 600 is machinable in both the hot worked and annealed conditions. Because considerable heat is generated in machining this alloy, high-speed steel, cast nonferrous or cemented carbide tools should be used. The tools should be kept sharp. Lathe turning speeds with high-speed and nonferrous tools are 35/45 sfm (0.18/0.23 m/s); speeds with cemented carbide tools are 100/175 sfm (0.51/0.89 m/s).

Hot and Cold Forming
The 600 alloy can only be strengthened by cold working. For best performance, En. 2.4816 can be cold worked below 1200°F (649°C). Hot working should be done between 2300°F – 1850°F, while light working can be done at 1600°F.

Maximum temperatures that Inconel alloy may be used in different environments are as follows:

  • Long-term continuous use in air oxidizing environment: 1100℃
  • Reducing environment of H2 or CO not containing sulfur: 1150℃
  • Oxidizing sulfur environment (in air containing sulfurous acid): 815℃
  • Reducing environment containing hydrogen sulfide: 535℃
  • Hydrogen chloride: 540℃
  • Chlorine gas: 510℃

Siddhagiri Metals and Tubes manufactures and supplies all forms of Inconel (UNS N06600)  Pipe ASTM B167, Tube ASTM B163, Flange ASTM B564, Pipe Fittings ASTM B366, Round Bar ASTM B166, Sheet Plate ASTM B168 And Os-Lok Tube Fittings. Contact for best price on Inconel 600 Grade.

Inconel® is a registered trademark of Special Metals Corporation.

Forms of Inconel 600

Inconel Alloy 600 Chemical Composition:

Cr14.0 ~ 17.0

Incoloy 600 Mechanical Properties :

0.2% proof stress
Tensile strength

Inconel Alloy 600 Applications :

  • Chemical Industry
  • Food Processing
  • Nuclear Industry
  • Aerospace
  • Heat treating Industries
  • Pulp and paper Industry
  • Gas turbine components

Inconel 600 (UNS N06600) Equivalent Grades and Other Names :

  • EN 2.4816
  • Incoloy Alloy 600
  • Nickel Alloy 600
  • NC15FE11M
  • NCF 600
  • Alloy 600
  • A600
  • NA 14
  • Nickel 600
  • UNS N06600
  • Incoloy 600
  • Inconel 600

Siddhagiri Metals and Tubes, Inconel 600 Grade Manufacturer, Exporter:

Siddhagiri Metals and Tubes is global Inconel 600 supplier. Inconel 600 Products are available as :-

  • Inconel 600 Pipe
  • Inconel Alloy 600 Tube
  • Incoloy 600 En 2.4816 Flange
  • Inconel 600 UNS N06600 Pipe Fittings
  • UNS N06600 Forgings
  • Inco 600 Fasteners
  • Alloy 600 Ferrule Fitting
  • Alloy 600 Sheet Plate
  • Incoloy Round Bar

Whatever might be the particular, review or administration, we offer the best answer for every one of the questions. Our stock position and overall business connections make us a pioneer in the appropriation business. Each of our items are manufactured from excellent crude materials. These items are fabricated under the supervision of our accomplished specialists utilizing most recent innovation. As a Renowned Inconel 600 dealer, our capacity to supply  products on an undertaking premise is one of our most grounded skills and is phenomenal in this business around the world.

Review Date
Reviewed Item
Inconel Alloy 600
Author Rating
error: Content is protected !!